NORGLIDE® MP Bearings
A plastic material which allows the large-scale production of bearings.
NORGLIDE® MP is a maintenance-free bearing material with a woven metal fabric encapsulated in a wear-resistant PTFE compound which offers high-load capabilities. This combination of materials enables easy manual or automatic processing and installation.
NORGLIDE® MP can be adapted to many applications, including severe chemical environments. The material allows excellent sizing so that an interference fit of the bearing to the shaft can be designed to produce particular torques or eliminate play.
This metal fabric is available in either tin-bronze or stainless steel. The standard PTFE compound contains glass fibers and graphite. Special PTFE compounds are available on request. Fabricated parts include die-cuts, rolled cylinders, flanged cylinders and deep-drawn bearings. NORGLIDE® MP can be prepared for bonding (activating one side). This enables customers to glue the material to any metal or plastic surface.
|Nominal thickness (mm)||Material Structure|
|CuSN 6 Fabric||1.4401 Fabric|
NORGLIDE® MP, Type MP048GG-1001-B
|Maximum permissible specific bearing load
--Bearing load dynamic
|Coefficient of friction at RT
--On steel with ≥ 58 HRC
|@ 4.8 MPa and 0.058 m/s
@ 70 MPa and 0.0065 m/s
|Deformation under load||23ºC @ 100 N/mm 2, 1h||≤ 30||micron|
|Coefficient of heat transmission||SG PA 3022||1200||W/m2K|
|Operating temperature range||continuous
|-200 to +260
|Coefficient of linear thermal expansion||SG PA 1025||12||10-5/K|
|K Factor||0.18||10-6 mm3/ Nm|
|Volume resistivity||SG PA 1081||≥108||Ωcm2|
|Note: This is one example for this type of material design only. Some material properties are dependent from the used PTFE-Compound, the metal type and thickness.|